Free Sample Offer

Send us a reasonably sized sample of your part and we will electropolish it at no charge!

Pick Up & Delivery

Pick up and delivery available!
Click here.

Must Read

Read Control Electropolishing Corp''s 33-page report "Citric Acid & Pollution Prevention in Passivation & Electropolishing." Click here.

FB/Twitter


Passivating

Passivating is the process of making a material "passive" in relation to another material prior to using the materials together. For example, prior to storing hydrogen peroxide in an aluminium container, the container can be passivated by rinsing it with a dilute solution of nitric acid and peroxide alternating with deionized water. The nitric acid and peroxide oxidizes and dissolves any impurities on the inner surface of the container, and the deionized water rinses away the acid and oxidized impurities. Another typical passivating process of cleaning stainless steel tanks involves cleaning with sodium hydroxide and citric acid followed by nitric acid (up to 20% at 120 °F) and a complete water rinse. This process will restore the film, remove metal particles, dirt, and welding-generated compounds (e.g. oxides). In the context of corrosion, passivation is the spontaneous formation of a hard non-reactive surface film that inhibits further corrosion. This layer is usually an oxide or nitride that is a few atoms thick.

Advantages of Passivating Stainless Steel

  • Improves surface finish
  • Pickling & Passivating available
  • Consistent results
  • Guaranteed results
  • We conform to the standards of QQ-P-35
  • Copper sulfate testing available